The QOMOTOP 28-inch outdoor fire pit table uses propane fuel that doesn’t create smoke or smog. The heat output is 50,000 BTU, providing ample warmth and creating a bonfire atmosphere. This gas fire pit is designed for outdoor heating of patios, decks, spas, pools, and open areas.

When not burning with the fire pit, it can be easily converted into an outdoor dining table with the provided cover lid. It can function as a coffee table to enhance the appearance of your garden, patio, etc.

Features:

• 28" square fire table doubles as a coffee or dining table when the lid is in place
• Uses liquid propane fuel for stable and clean combustion, with no ash or smoke (20 lbs propane tank not included)
• Made of durable steel to prevent cracking
• Burner and control panel are made of stainless steel
• Externally integrated push and turn ignition makes flame adjustment and control simple
• Generates up to 50,000 BTU
• Rustproof paint finish with a beautiful rattan pattern
• Assembled Product Weight: 64 lbs
• Assembled Product Dimensions (L x W x H): 28″ × 28″ × 25″ H

Includes:

• QOMOTOP 28" Fire Pit Table
• Square Lid
• 20" Gas Hose
• Lava Stone

Important information
Please carefully read the user manual before installing and using the fire pit. It does not come with a standard 20 lb propane tank (not included). Allow 45 minutes for the fire pit to cool down after use, then disconnect and remove the cylinder.

Lighting Instructions
Ensure the control knob is in the “OFF” position. Open the LP cylinder gas valve fully. Press down the control knob and turn counterclockwise to the “MAX” position, holding it for 5 seconds to light the burner (you will hear one clicking noise). If the burner does not light within 5 seconds, turn the control knob clockwise to the “OFF” position, wait 5 minutes, and repeat from step 3. Adjust the heat output to your desired level between “MAX” and “MIN.”

Troubleshooting:
1.Check if the electrode wire is inserted into the safety valve and transfer the spark to the burner head to ignite the gas.
2.Ensure the ignition needle is in place: remove the ignition covering, align the needle with the air hole, and adjust the distance between the needle and the air hole to 3mm.
3.Check if the propane in the cylinder is running low. If the gas pressure decreases, the fire pit may not light and the tank or cylinder needs to be replaced.